Exploring the substrate spectrum of phylogenetically distinct bacterial polyesterases.

The rapid escalation of plastic waste accumulation presents a significant threat of the modern world, demanding an immediate solution. Over the last years, utilization of the enzymatic machinery of various microorganisms has emerged as an environmentally friendly asset in tackling this pressing global challenge. Thus, various hydrolases have been demonstrated to effectively degrade polyesters. Plastic waste streams often consist of a variety of different polyesters, as impurities, mainly due to wrong disposal practices, rendering recycling process challenging. The elucidation of the selective degradation of polyesters by hydrolases could offer a proper solution to this problem, enhancing the recyclability performance. Towards this, our study focused on the investigation of four bacterial polyesterases, including DaPUase, IsPETase, PfPHOase, and Se1JFR, a novel PETase-like lipase. The enzymes, which were biochemically characterized and structurally analyzed, demonstrated degradation ability of synthetic plastics. While a consistent pattern of polyesters' degradation was observed across all enzymes, Se1JFR stood out in the degradation of PBS, PLA, and polyether PU. Additionally, it exhibited comparable results to IsPETase, a benchmark mesophilic PETase, in the degradation of PCL and semi-crystalline PET. Our results point out the wide substrate spectrum of bacterial hydrolases and underscore the significant potential of PETase-like enzymes in polyesters degradation.

Discovery of a polyesterase from Deinococcus maricopensis and comparison to the benchmark LCCICCG suggests high potential for semi-crystalline post-consumer PET degradation.

Plastic pollution remains a significant environmental challenge, with conventional waste management strategies proving insufficient in addressing the problem. Enzymatic degradation has emerged as a promising alternative, with LCCICCG, an engineered metagenome-derived cutinase, being the most effective in degrading polyethylene terephthalate (PET), the most commonly produced and discarded polyester. However, more efficient PET-hydrolases are needed for the upscaling of a PET-waste biorefinery. In this regard, the study reports the characterization of a novel, phylogenetically distinct, thermophilic polyesterase from Deinococcus maricopensis (DmPETase) and its comparison to LCCICCG. DmPETase is capable of degrading various synthetic polymers, including PET, polyurethane, as well as four semi-crystalline aliphatic polyesters. DmPETase was found to be comparable to LCCICCG at 50 °C in degrading semi-crystalline sections of post-consumer PET bottles, but it appeared to be less sensitive to crystallinity degree increase. This property makes DmPETase a new template for protein engineering endeavors to create an efficient biocatalyst to be integrated into the bio-recycling process of PET waste, without the need for amorphization of the materials.

Triggering and identifying the polyurethane and polyethylene-degrading machinery of filamentous fungi secretomes.

The uncontrollable disposal of plastic waste has raised the concern of the scientific community, which tries to face this environmental burden by discovering and applying new techniques. Regarding the biotechnology field, several important microorganisms possessing the necessary enzymatic arsenal to utilize recalcitrant synthetic polymers as an energy source have been discovered. In the present study, we screened various fungi for their ability to degrade intact polymers, such as ether-based polyurethane (PU) and low-density polyethylene (LDPE). For this, ImpranIil® DLN-SD and a mixture of long-chain alkanes were used as sole carbon sources, indicating not only the most promising strains in agar plate screening but also inducing the secretion of depolymerizing enzymatic activities, useful for polymer degradation. The agar plate screening revealed three fungal strains belonging to Fusarium and Aspergillus genera, whose secretome was further studied for its ability to degrade the aforementioned non-treated polymers. Specifically for ether-based PU, the secretome of a Fusarium species reduced the sample mass and the average molecular weight of the polymer by 24.5 and 20.4%, respectively, while the secretome of an Aspergillus species caused changes in the molecular structure of LDPE, as evidenced by FTIR. The proteomics analysis revealed that the enzymatic activities induced in presence of Impranil® DLN-SD can be associated with urethane bond cleavage, a fact which was also supported by the observed degradation of the ether-based PU. Although, the mechanism of LDPE degradation was not completely elucidated, the presence of oxidative enzymes could be the main factor contributing to polymer modification.

Crystal structure of the Fusarium oxysporum tannase-like feruloyl esterase FaeC in complex with p-coumaric acid provides insight into ligand binding.

Feruloyl esterases (FAEs) hydrolyze the ester bonds between hydroxycinnamic acids and arabinose residues of plant cell walls and exhibit considerable diversity in terms of substrate specificity. Here, we report the crystal structure of an FAE from Fusarium oxysporum (FoFaeC) at 1.7 Å resolution in complex with p-coumaric acid, which is the first ligand-bound structure of a tannase-like FAE. Our data reveal local conformational changes around the active site upon ligand binding, suggesting alternation between an active and a resting state of the enzyme. A swinging tyrosine residue appears to be gating the substrate binding pocket, while the lid domain of the protein exerts substrate specificity by means of a well-defined hydrophobic core that encases the phenyl moiety of the substrate.

A polyesterase from the Antarctic bacterium Moraxella sp. degrades highly crystalline synthetic polymers.

The uncontrolled release of plastics in the environment has rendered them ubiquitous around the planet, threatening the wildlife and human health. Biodegradation and valorization of plastics has emerged as an eco-friendly alternative to conventional management techniques. Discovery of novel polymer-degrading enzymes with diversified properties is hence an important task in order to explore different operational conditions for plastic-waste upcycling. In the present study, a barely studied psychrophilic enzyme (MoPE) from the Antractic bacterium Moraxella sp. was heterologously expressed, characterized and its potential in polymer degradation was further investigated. Based on its amino acid composition and structure, MoPE resembled PET-degrading enzymes, sharing features from both mesophilic and thermophilic homologues. MoPE hydrolyzes non-biodegradable plastics, such as polyethylene terephthalate and polyurethane, as well as biodegradable synthetic polyesters, such as polycaprolactone, polyhydroxy butyrate, polybutylene succinate and polylactic acid. The mass fraction crystallinity of the aliphatic polymers tested ranged from 11% to 64% highlighting the potential of the enzyme to hydrolyze highly crystalline plastics. MoPE was able to degrade different types of amorphous and semi-crystalline PET, releasing water-soluble monomers and showed synergy with a feruloyl esterase of the tannase family for the release of terephthalic acid. Based on the above, MoPE was characterized as a versatile psychrophilic polyesterase demonstrating a broad-range plastics degradation potential.

Recent advances on key enzymatic activities for the utilisation of lignocellulosic biomass.

The field of enzymatic degradation of lignocellulose is actively growing and the recent updates of the last few years indicate that there is still much to learn. The growing number of protein sequences with unknown function in microbial genomes indicates that there is still much to learn on the mechanisms of lignocellulose degradation. In this review, a summary of the progress in the field is presented, including recent discoveries on the nature of the structural polysaccharides, new technologies for the discovery and functional annotation of gene sequences including omics technologies, and the novel lignocellulose-acting enzymes described. Novel enzymatic activities and enzyme families as well as accessory enzymes and their synergistic relationships regarding biomass breakdown are described. Moreover, it is shown that all the valuable knowledge of the enzymatic decomposition of plant biomass polymers can be employed towards the decomposition and upgrading of synthetic polymers, such as plastics.

Unique features of the bifunctional GH30 from Thermothelomyces thermophila revealed by structural and mutational studies.

Fungal xylanases belonging to family GH30_7, initially categorized as endo-glucuronoxylanases, are now known to differ both in terms of substrate specificity, as well as mode of action. Recently, TtXyn30A, a GH30_7 xylanase from Thermothelomyces thermophila, was shown to possess dual activity, acting on the xylan backbone in both an endo- and an exo- manner. Here, in an effort to identify the structural characteristics that append these functional properties to the enzyme, we present the biochemical characterization of various TtXyn30A mutants as well as its crystal structure, alone, and in complex with the reaction product. An auxiliary catalytic amino acid has been identified, while it is also shown that glucuronic acid recognition is not mediated by a conserved arginine residue, as shown by previously determined GH30 structures.

Progressing Plastics Circularity: A Review of Mechano-Biocatalytic Approaches for Waste Plastic (Re)valorization.

Inspirational concepts, and the transfer of analogs from natural biology to science and engineering, has produced many excellent technologies to date, spanning vaccines to modern architectural feats. This review highlights that answers to the pressing global petroleum-based plastic waste challenges, can be found within the mechanics and mechanisms natural ecosystems. Here, a suite of technological and engineering approaches, which can be implemented to operate in tandem with nature's prescription for regenerative material circularity, is presented as a route to plastics sustainability. A number of mechanical/green chemical (pre)treatment methodologies, which simulate natural weathering and arthropodal dismantling activities are reviewed, including: mechanical milling, reactive extrusion, ultrasonic-, UV- and degradation using supercritical CO2. Akin to natural mechanical degradation, the purpose of the pretreatments is to render the plastic materials more amenable to microbial and biocatalytic activities, to yield effective depolymerization and (re)valorization. While biotechnological based degradation and depolymerization of both recalcitrant and bioplastics are at a relatively early stage of development, the potential for acceleration and expedition of valuable output monomers and oligomers yields is considerable. To date a limited number of independent mechano-green chemical approaches and a considerable and growing number of standalone enzymatic and microbial degradation studies have been reported. A convergent strategy, one which forges mechano-green chemical treatments together with the enzymatic and microbial actions, is largely lacking at this time. An overview of the reported microbial and enzymatic degradations of petroleum-based synthetic polymer plastics, specifically: low-density polyethylene (LDPE), high-density polyethylene (HDPE), polystyrene (PS), polyethylene terephthalate (PET), polyurethanes (PU) and polycaprolactone (PCL) and selected prevalent bio-based or bio-polymers [polylactic acid (PLA), polyhydroxyalkanoates (PHAs) and polybutylene succinate (PBS)], is detailed. The harvesting of depolymerization products to produce new materials and higher-value products is also a key endeavor in effectively completing the circle for plastics. Our challenge is now to effectively combine and conjugate the requisite cross disciplinary approaches and progress the essential science and engineering technologies to categorically complete the life-cycle for plastics.

Considerations Regarding Activity Determinants of Fungal Polyphenol Oxidases Based on Mutational and Structural Studies.

Polyphenol oxidases (PPOs) are an industrially relevant family of enzymes, being involved in the postharvest browning of fruits and vegetables, as well as in human melanogenesis. Their involvement lies in their ability to oxidize phenolic or polyphenolic compounds, which subsequently form pigments. The PPO family includes tyrosinases and catechol oxidases, which, in spite of their high structural similarity, exhibit different catalytic activities. Long-standing research efforts have not yet managed to decipher the structural determinants responsible for this differentiation, as every new theory is disproved by a more recent study. In the present work, we combined biochemical along with structural data in order to better understand the function of a previously characterized PPO from Thermothelomyces thermophila (TtPPO). The crystal structure of a TtPPO variant, determined at 1.55 Å resolution, represents the second known structure of an ascomycete PPO. Kinetic data for structure-guided mutants prove the implication of "gate" residue L306, residue HB1+1 (G292), and HB2+1 (Y296) in TtPPO function against various substrates. Our findings demonstrate the role of L306 in the accommodation of bulky substrates and show that residue HB1+1 is unlikely to determine monophenolase activity, as was suggested from previous studies.IMPORTANCE PPOs are enzymes of biotechnological interest. They have been extensively studied both biochemically and structurally, with a special focus on the plant-derived counterparts. Even so, explicit description of the molecular determinants of their substrate specificity is still pending. For ascomycete PPOs, only one crystal structure has been determined so far, thus limiting our knowledge on this tree branch of the family. In the present study, we report the second crystal structure of an ascomycete PPO. Combined with site-directed mutagenesis and biochemical studies, we depict the amino acids in the vicinity of the active site that affect enzyme activity and perform a detailed analysis on a variety of substrates. Our findings improve current understanding of structure-function relations of microbial PPOs, which is a prerequisite for the engineering of biocatalysts of desired properties.

Functional and transcriptomic investigation of laccase activity in the presence of PCB29 identifies two novel enzymes and the multicopper oxidase repertoire of a marine-derived fungus.

Polychlorinated biphenyls (PCBs) are persistent organic pollutants (POPs), that can be detected in a variety of environments including the human body, adversely affecting global health. Bioremediation is an emerging field for the detoxification and removal of environmental pollutants, with novel biocatalysts appropriate for this task being in high demand. In this study, a biobank of novel fungal strains isolated as symbionts of marine invertebrates was screened for their ability to remove 2,4,5-trichlorobiphenyl (PCB29). The most efficient strains were studied further for their ability to express laccase activity, the most commonly associated extracellular activity involved in the removal of aromatic pollutants and encoded in fungi by the enzymatic class of multicopper oxidases (MCOs). The strain expressing the highest laccase activity, Cladosporium sp. TM138-S3, was cultivated in the presence of copper ions in a 12 L bioreactor and two enzymes exhibiting laccase activity were isolated from the culture broth through ion-exchange chromatography. The two enzymes, Lac1 and Lac2, were biochemically characterized and showed similar characteristics, although an improved ability to remove PCB29 (up to 71.2%) was observed for Lac2 in the presence of mediators. In parallel, we performed RNAseq of the strain growing in presence and absence of PCB29 and reconstructed its transcriptome assembly. Functional annotation allowed identifying the MCO repertoire of the fungus, consisting of 13 enzymes. Phylogenetic analysis of Ascomycete MCOs further allowed classifying these enzymes, revealing the diversity of laccase activities in Cladosporium sp. TM138-S3.

Synthesis and characterization of polyethylene terephthalate (PET) precursors and potential degradation products: Toxicity study and application in discovery of novel PETases.

Polyethylene terephthalate (PET) is widely used material and as such became highly enriched in nature. It is generally considered inert and safe plastic, but due to the recent increased efforts to break-down PET using biotechnological approaches, we realized the scarcity of information about structural analysis of possible degradation products and their ecotoxicological assessment. Therefore, in this study, 11 compounds belonging to the group of PET precursors and possible degradation products have been comprehensively characterized. Seven of these compounds including 1-(2-hydroxyethyl)-4-methylterephthalate, ethylene glycol bis(methyl terephthalate), methyl bis(2-hydroxyethyl terephtahalate), 1,4-benzenedicarboxylic acid, 1,4-bis[2-[[4-(methoxycarbonyl)benzoyl]oxy]ethyl] ester and methyl tris(2-hydroxyethyl terephthalate) corresponding to mono-, 1.5-, di-, 2,5- and trimer of PET were synthetized and structurally characterized for the first time. In-silico druglikeness and physico-chemical properties of these compounds were predicted using variety of platforms. No antimicrobial properties were detected even at 1000 µg/mL. Ecotoxicological impact of the compounds against marine bacteria Allivibrio fischeri proved that the 6 out of 11 tested PET-associated compounds may be classified as harmful to aquatic microorganisms, with PET trimer being one of the most toxic. In comparison, most of the compounds were not toxic on human lung fibroblasts (MRC-5) at 200 µg/mL with inhibiting concentration (IC50) values of 30 µg/mL and 50 µg/mL determined for PET dimer and trimer. Only three of these compounds including PET monomer were toxic to nematode Caenorhabditis elegans at high concentration of 500 µg/mL. In terms of the applicative potential, PET dimer can be used as suitable substrate for the screening, identification and characterization of novel PET-depolymerizing enzymes.

Progressing Ultragreen, Energy-Efficient Biobased Depolymerization of Poly(ethylene terephthalate) via Microwave-Assisted Green Deep Eutectic Solvent and Enzymatic Treatment.

Effective interfacing of energy-efficient and biobased technologies presents an all-green route to achieving continuous circular production, utilization, and reproduction of plastics. Here, we show combined ultragreen chemical and biocatalytic depolymerization of polyethylene terephthalate (PET) using deep eutectic solvent (DES)-based low-energy microwave (MW) treatment followed by enzymatic hydrolysis. DESs are emerging as attractive sustainable catalysts due to their low toxicity, biodegradability, and unique biological compatibility. A green DES with triplet composition of choline chloride, glycerol, and urea was selected for PET depolymerization under MW irradiation without the use of additional depolymerization agents. Treatment conditions were studied using Box-Behnken design (BBD) with respect to MW irradiation time, MW power, and volume of DES. Under the optimized conditions of 20 mL DES volume, 260 W MW power, and 3 min MW time, a significant increase in the carbonyl index and PET percentage weight loss was observed. The combined MW-assisted DES depolymerization and enzymatic hydrolysis of the treated PET residue using LCC variant ICCG resulted in a total monomer conversion of ≈16% (w/w) in the form of terephthalic acid, mono-(2-hydroxyethyl) terephthalate, and bis-(2-hydroxyethyl) terephthalate. Such high monomer conversion in comparison to enzymatically hydrolyzed virgin PET (1.56% (w/w)) could be attributed to the recognized depolymerization effect of the selected DES MW treatment process. Hence, MW-assisted DES technology proved itself as an efficient process for boosting the biodepolymerization of PET in an ultrafast and eco-friendly manner.

Degradation Mechanism of 2,4-Dichlorophenol by Fungi Isolated from Marine Invertebrates.

2,4-Dichlorophenol (2,4-DCP) is a ubiquitous environmental pollutant categorized as a priority pollutant by the United States (US) Environmental Protection Agency, posing adverse health effects on humans and wildlife. Bioremediation is proposed as an eco-friendly, cost-effective alternative to traditional physicochemical remediation techniques. In the present study, fungal strains were isolated from marine invertebrates and tested for their ability to biotransform 2,4-DCP at a concentration of 1 mM. The most competent strains were studied further for the expression of catechol dioxygenase activities and the produced metabolites. One strain, identified as Tritirachium sp., expressed high levels of extracellular catechol 1,2-dioxygenase activity. The same strain also produced a dechlorinated cleavage product of the starting compound, indicating the assimilation of the xenobiotic by the fungus. This work also enriches the knowledge about the mechanisms employed by marine-derived fungi in order to defend themselves against chlorinated xenobiotics.

Draft Genome Sequence of a Cladosporium Species Isolated from the Mesophotic Ascidian Didemnum maculosum.

We report the 28-Mbp draft genome sequence of the marine fungus Cladosporium sp. strain TM138. The species was isolated from the marine invertebrate Didemnum maculosum Its genome sequence will inform future investigations into the species' enzymatic potential for bioremediation and its evolution in marine environments.

Unraveling the Detoxification Mechanism of 2,4-Dichlorophenol by Marine-Derived Mesophotic Symbiotic Fungi Isolated from Marine Invertebrates.

Chlorophenols (CPs) are environmental pollutants that are produced through various anthropogenic activities and introduced in the environment. Living organisms, including humans, are exposed to these toxic xenobiotics and suffer from adverse health effects. More specifically, 2,4-dichlorophenol (2,4-DCP) is released in high amounts in the environment and has been listed as a priority pollutant by the US Environmental Protection Agency. Bioremediation has been proposed as a sustainable alternative to conventional remediation methods for the detoxification of phenolic compounds. In this work, we studied the potential of fungal strains isolated as symbionts of marine invertebrates from the underexplored mesophotic coral ecosystems. Hence, the unspecific metabolic pathways of these fungal strains are being explored in the present study, using the powerful analytical capabilities of a UHPLC-HRMS/MS. The newly identified 2,4-DCP metabolites add significantly to the knowledge of the transformation of such pollutants by fungi, since such reports are scarce.

Versatile Fungal Polyphenol Oxidase with Chlorophenol Bioremediation Potential: Characterization and Protein Engineering.

Polyphenol oxidases (PPOs) have been mostly associated with the undesirable postharvest browning in fruits and vegetables and have implications in human melanogenesis. Nonetheless, they are considered useful biocatalysts in the food, pharmaceutical, and cosmetic industries. The aim of the present work was to characterize a novel PPO and explore its potential as a bioremediation agent. A gene encoding an extracellular tyrosinase-like enzyme was amplified from the genome of Thermothelomyces thermophila and expressed in Pichia pastoris The recombinant enzyme (TtPPO) was purified and biochemically characterized. Its production reached 40 mg/liter, and it appeared to be a glycosylated and N-terminally processed protein. TtPPO showed broad substrate specificity, as it could oxidize 28/30 compounds tested, including polyphenols, substituted phenols, catechols, and methoxyphenols. Its optimum temperature was 65°C, with a half-life of 18.3 h at 50°C, while its optimum pH was 7.5. The homology model of TtPPO was constructed, and site-directed mutagenesis was performed in order to increase its activity on mono- and dichlorophenols (di-CPs). The G292N/Y296V variant of TtPPO 5.3-fold increased activity on 3,5-dichlorophenol (3,5-diCP) compared to the wild type.IMPORTANCE A novel fungal PPO was heterologously expressed and biochemically characterized. Construction of single and double mutants led to the generation of variants with altered specificity against CPs. Through this work, knowledge is gained regarding the effect of mutations on the substrate specificity of PPOs. This work also demonstrates that more potent biocatalysts for the bioremediation of harmful CPs can be developed by applying site-directed mutagenesis.

Enzymatic tailoring of oleuropein from Olea europaea leaves and product identification by HRMS/MS spectrometry.

Oleuropein, a bioactive compound found in all parts of olive tree, especially in leaves and branches, presents numerous health promoting properties that increase research and market interest the last few years. In addition, oleuropein degradation products, such as hydroxytyrosol, elenolic acid, and the aglycones also exhibit biological activities with different properties compared to the starting compound. Under this view, a commercial lipase preparation Lipolase 100L and a thermophilic ß-glucosidase from Myceliophthora thermophila were used for the regioselective hydrolysis of oleuropein towards the production of the corresponding biologically active compounds. The enzymatic degradation products of oleuropein, such as hydroxytyrosol, elenolic acid and its glucoside, and oleuropein aglycones were identified by LC-HRMS/MS and NMR spectroscopy. The latter, was found as a mix of diastereomers of the monoaldehydic form of oleuropein aglycone, identified as (5S, 8R, 9S)-, (5S, 8S, 9S)- and (5S, 8R, 9R). The high substrate specificity exhibited by both lipase and ß-glucosidase allows the successful tailoring of oleuropein towards the production of different biologically active compounds with significant potential in the cosmeceutical and food industry.

Immobilization of a Cutinase from Fusarium oxysporum and Application in Pineapple Flavor Synthesis.

In the present study, the immobilization of a cutinase from Fusarium oxysporum was carried out as cross-linked enzyme aggregates. Under optimal immobilization conditions, acetonitrile was selected as precipitant, utilizing 9.4 mg protein/mL and 10 mM glutaraldehyde as cross-linker. The immobilized cutinase (imFocut5a) was tested in isooctane for the synthesis of short-chain butyrate esters, displaying enhanced thermostability compared to the free enzyme. Pineapple flavor (butyl butyrate) synthesis was optimized, leading to a conversion yield of >99% after 6 h, with an initial reaction rate of 18.2 mmol/L/h. Optimal reaction conditions were found to be 50 °C, a vinyl butyrate/butanol molar ratio of 3:1, vinyl butyrate concentration of 100 mM, and enzyme loading of 11 U. Reusability studies of imFocut5a showed that after four consecutive runs, the reaction yield reaches 54% of the maximum. The efficient bioconversion offers a sustainable and environmentally friendly process for the production of "natural" aroma compounds essential for the food industry.

Marine-Derived Biocatalysts: Importance, Accessing, and Application in Aromatic Pollutant Bioremediation.

The aim of the present review is to highlight the potential use of marine biocatalysts (whole cells or enzymes) as an alternative bioprocess for the degradation of aromatic pollutants. Firstly, information about the characteristics of the still underexplored marine environment and the available scientific tools used to access novel marine-derived biocatalysts is provided. Marine-derived enzymes, such as dioxygenases and dehalogenases, and the involved catalytic mechanisms for the degradation of aromatic and halogenated compounds, are presented, with the purpose of underpinning their potential use in bioremediation. Emphasis is given on persistent organic pollutants (POPs) that are organic compounds with significant impact on health and environment due to their resistance in degradation. POPs bioaccumulate mainly in the fatty tissue of living organisms, therefore current efforts are mostly focused on the restriction of their use and production, since their removal is still unclear. A brief description of the guidelines and criteria that render a pollutant POP is given, as well as their potential biodegradation by marine microorganisms by surveying recent developments in this rather unexplored field.

The use of chitosan in protecting wooden artifacts from damage by mold fungi

Background: Many buildings in Egypt e.g. museums, mosques and churches, do not possess controlled environments for minimizing the risks of damage of wooden artifacts due to the growth of fungi. Fungal damage usually appears as change in wood color, appearance of stains, and sometimes deformation of wooden surfaces. In this study we focused on the effect that some fungi exert on the properties of wooden artifacts and evaluated the effectiveness of different concentrations of chitosan on their protection against damage by mold fungi. Results: Samples were collected from different monuments and environments, and fungi growing on them were isolated and identified. The isolated Penicillium chrysogenum, Aspergillus flavus and /Aspergillus niger strains were used for the infestation of new pitch pine samples. The results revealed that the lightness of samples infected with any of the tested fungi decreased with increasing incubation times. XRD analysis showed that the crystallinity of incubated samples treated individually with the different concentrations of chitosan was lower than the crystallinity of infected samples. The crystallinity index measured by the first and the second method decreased after the first and second months but increased after the third and fourth months. This may due to the reducing of amorphous part by enzymes or acids produced by fungi in wooden samples. Conclusions: The growth of fungi on the treated wood samples decreased with increasing the concentration of chitosan. Hence, it was demonstrated that chitosan prevented fungal growth, and its use could be recommended for the protection of archeological wooden artifacts.